Mag Base Auto 55mm Drill 510rpm 16500n 230mm Stroke 220v Multi Funct
Mag Base Auto 55mm Drill 510rpm 16500n 230mm Stroke 220v Multi Funct
- Stock: 1
- MPN: TCMD0055QE
- Weight: 23.76kg
- Dimensions: 360.00mm x 270.00mm x 445.00mm
- SKU: TCMD0055QE
- UPC: 6009515871031
N$ 36,137.78
Ex VAT: N$ 31,424.16
55mm MAGNETIC BASE DRILL 16500N
The magnetic base drill is fitted on a strong dual-coil magnet with a maximum core drill capacity of 55mm.
With the added auto-feed function with auto-stop, the drill no longer needs variable speed. Instead, it automatically adjusts the feed speed according to the load.
Application:
- Building construction
- Bridge construction
- Ship/Marine Construction
- Annular cutters or twist drill bits
- Horizontal or overhead drilling
Great for horizontal, side face and top face drilling
| Description | Specifications |
| Rated voltage & frequency | 220V-240V @ 50-60 Hz |
| Cable length | 2.5m |
| Core drill capacity | Ø 55mm |
| Rated imput power | 1700W |
| No-Load speed | 280/510 rpm |
| Maximum magnetic attraction | 16000N |
| Cutting depth | 40mm |
| Stroke | 230mm |
| Magnet Dimensions | 166(L) x 80(W) x 50(H) mm |
Download the Exploded view:
View the Exploded view:
Download the Instruction Manual:
View the Instruction Manual:
Download the Spec Sheet:
View the Spec Sheet:
Download the Leaflet:
View the Leaflet:
Getting the best out of a Magnetic base drill:
- Always wear proper safety PPE (Personal Protective Equipment).
- Ensure the machine is switched off and unplugged from the power supply when changing or adjusting the cutting bits.
- During machine operation the cutters and drill bits must be lubricated and cooled with a suitable cutting fluid.
- Ensure the surface where the machine will be placed on is level, rust free and clean of any varnish or paint.
- Do not try and use the magnetic drill on a non-magnetic surface.
- Do not use the magnetic drill on a structure where welding is in progress as it could cause damage to the machine.
- Always use core drill bits with a pilot pin
